The Exhaust Bypass Valve Controller allows the driver to remotely control the exhaust bypass valves by intercepting the signal to the vacuum solenoid. Using the Forza 3-Way Controller, you have three modes of operation:
 
1. Normal Mode … In this mode, the controller allows the vehicle’s ECU to control the exhaust bypass valves. This is the default mode.
2. Always Open … The controller will intercept the ECU signal and keep the exhaust bypass valves always open.
3. Always Closed … The controller will intercept the ECU signal and keep the exhaust bypass valves always closed.
 
You can use either the included remote control transmitter or a manual on/off switch that you can install inside the passenger compartment. Using either method, you can select any of the three modes of operation. Installation does not require any wiring modifications or splicing into the car’s electrical system. The unit is installed using the plug and play principal. If you are comfortable performing simple maintenance tasks on your car, you should not have any problems installing the kit yourself.
 
Included in the kit: • Remote Controller Unit • One fuse tap • One 10 amp fuse • Connection cable to connect vacuum solenoid valve to controller unit • Wire to connect the controller to the fuse tap • One Remote control transmitter (extra transmitters available) • 3M Dual Lock Mounting Tape • Nylon cable ties (not shown)
 
*This model is from 2016 and discontinued. New part, old stock - some scratches on back of case shown in pics.